Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VG202XM configuration

Hi     there,

I got a VG202XM fax gateway to be configured, for some reason the auto configuration does not work.

It failed to find the correct tftp server and keeps trying to connect to the 255.255.255.255.

I followed the instruction about how to configured VG202, and the same configuration worked on the VG202

Here is the configuration, I have configured ccm-manager sccp, but since it can not get the configuration and the command was removed.

ip cef

no ipv6 cef

!

stcapp ccm-group 1

!

stcapp feature access-code

!

stcapp feature speed-dial

!

!

!

!

!

!

!

voice service voip

!

!

!

!

!

voice-card 0

!

!

!

!

!

!

!

interface FastEthernet0/0

ip address dhcp

duplex auto

speed auto

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

ip forward-protocol nd

!

no ip http server

!

!

!

control-plane

!

!

voice-port 0/0

timeouts initial 60

timeouts interdigit 60

timeouts ringing infinity

!

voice-port 0/1

!

ccm-manager sccp local FastEthernet0/0

!

mgcp behavior rsip-range tgcp-only

mgcp behavior comedia-role none

mgcp behavior comedia-check-media-src disable

mgcp behavior comedia-sdp-force disable

!

mgcp profile default

!

sccp local FastEthernet0/0

!

dial-peer voice 999000 pots

service stcapp

port 0/0

ip cef
no ipv6 cef
!
stcapp ccm-group 1
!
stcapp feature access-code
!
stcapp feature speed-dial
!
!
!
!
!
!
!
voice service voip
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
interface FastEthernet0/0
ip address dhcp
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
!
!
!
control-plane
!
!
voice-port 0/0
timeouts initial 60
timeouts interdigit 60
timeouts ringing infinity
!
voice-port 0/1
!
ccm-manager sccp local FastEthernet0/0
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
sccp local FastEthernet0/0
!
dial-peer voice 999000 pots
service stcapp
port 0/0

and here is the error message.

%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/bombovg202_2-confg (Timed out)
*Mar  3 17:52:05.571: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
*Mar  3 17:52:05.575: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/bombovg202_2-confg) failed
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/bombovg2.cfg (Timed out)
*Mar  3 17:52:43.571: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
*Mar  3 17:52:43.575: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/bombovg2.cfg) failed.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/bombovg202_2-confg (Timed out)
*Mar  3 17:55:21.571: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
*Mar  3 17:55:21.575: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/bombovg202_2-confg) failed
% Bad IP address or host name
% Unknown command or computer name, or unable to find computer address

5 REPLIES
Hall of Fame Super Silver

VG202XM configuration

Are you trying to use SCCP or MGCP as you have both configured?

Chris

New Member

VG202XM configuration

Hi             Chris,

I am trying to use SCCP and CUCM version is 7.13.

even though I configured the tftp server (ccm-manager config server ip address), it won't use it to download the file, it keeps contacting 255.255.255.255.

Hall of Fame Super Silver

VG202XM configuration

SCCP does not use this command, all you need for SCCP is:

stcapp

stcapp ccm-group 1

sccp local FastEthernet0/0

sccp ccm identifier 1 version 7.0

sccp ccm identifier 2 version 7.0

sccp

!

sccp ccm group 1

bind interface FastEthernet0/0

associate ccm 1 priority 1

associate ccm 2 priority 2

voice-port 2/0

caller-id enable

...

dial-peer voice 100 pots

service stcapp

port 2/0

...

HTH,

Chris

New Member

VG202XM configuration

Hi             Chris,

Before when I configure the VG202, I just need to configure below command and it will automatically download the file from CUCM, but now it did not work. I will try your commands tomorrow and let you know if it works.

Interface fa0/0

ip address dhcp

not shu

ccm-manager sccp local FastEthernet0/0

ccm-manager sccp

!

!

sccp local FastEthernet0/0

Hall of Fame Super Silver

VG202XM configuration

Not sure how that could have used for you without pointing to anything. Let us know if your issue is resolved by marking the thread as answered.

Chris

1487
Views
0
Helpful
5
Replies
CreatePlease to create content