Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG202XM SRTP Configuration with CUCM

Hi,

we want to use SRTP on our VG202XM. We use CUCM9.1 and want to use SCCP for the VG202XM. Also we want to use Feature Access Codes, so MGCP for the VG is not possible.

The only configuration i found for SRTP is for VG224.               

http://www.cisco.com/en/US/partner/docs/ios/voice/fxs/configuration/guide/fsxsecur.html#wp1076224

There in the restirction you can see.

"This feature is not supported for analog SCCP endpoints in Cisco Unified Communications Manager."

Does someone have a configuration for this.

Best Regards

Daniel

1 REPLY
Cisco Employee

VG202XM SRTP Configuration with CUCM

Hi Daniel,

FAC with SRTP is supported with 15.1(3)T or later and with CUCM version 8.6 or later.

To configure the SRTP on GW/CUCM, Please use the following:

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccptlscm.html

HTH

Manish

296
Views
0
Helpful
1
Replies
CreatePlease login to create content