Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VG204 Caller-ID Problem..

Hi all..

We are using vg204 with cucm 8.5.

We enabled caller-ID on vg204 and directory Number in cucm..

But it couldn't operate any anlaog phone.

So I upgraded version for Vg204 what is vg20x-ipvoice-mz.124-24.T6, vg20x-ipvoice-mz.150-1.M8 and vg20x-ipvoice-mz.151-3.T3.

it also can not operate on vg204 .

i assigned like this..

!

voice-port 2/3

cptone KR

timeouts ringing infinity

caller-id enable

! !
voice-port 2/3
cptone KR
timeouts ringing infinity
caller-id enable
!

Please tell me the solution..

Thanks.

4 REPLIES
Bronze

VG204 Caller-ID Problem..

Hi Myung,

Can you see CallerID if you plug in a regular phone or CallerID device into the same line?

Please post "show run | i mgcp|ccm" from the gateway.

Cheers,

Boris

_____ Please rate helpful posts Пожалуйста оценивайте полезные сообщения
New Member

Re: VG204 Caller-ID Problem..

We are using a stcapp .  Directory number is normally registration on vg204

it's our vg 204 running config .

VG204#show run
Building configuration...


Current configuration : 2199 bytes
!

version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!

boot-start-marker
boot system flash vg20x-ipvoice-mz.124-24.T6.bin
boot-end-marker
!
logging message-counter syslog

!
no aaa new-model
clock timezone KST 9
ip source-route
!
!
!
!
ip cef
no ip domain lookup
no ipv6 cef
!
stcapp ccm-group 1
stcapp
!
stcapp feature access-code
prefix *
pickup local *
!
!
!
stcapp supplementary-services
port 0/0
  fallback-dn 4170
port 0/1
  fallback-dn 4969
port 0/2
  fallback-dn 4254
port 0/3
  fallback-dn 4885
!
!
!
!
!
voice service voip
fax protocol cisco
!

voice-card 0
!
archive
log config
  hidekeys
!
interface FastEthernet0/0
ip address 1.1.1.1 255.255.255.0
speed 100
full-duplex
!
interface FastEthernet0/1
no ip address
speed 100
full-duplex
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 1.1.1.254 255.255.255.0
!
no ip http server
!
control-plane
!
voice-port 0/0
ring cadence pattern04
cptone KR
timeouts ringing infinity
caller-id enable
!
voice-port 0/1
ring cadence pattern04
cptone KR
timeouts ringing infinity
caller-id enable
!
voice-port 0/2
ring cadence pattern04
cptone KR
timeouts ringing infinity
caller-id enable
!
voice-port 0/3
ring cadence pattern04
cptone KR
timeouts ringing infinity
caller-id enable
!
ccm-manager sccp local FastEthernet0/0
!
sccp local FastEthernet0/0
sccp ccm 1.1.1.103 identifier 10 version 7.0
sccp ccm 1.1.1.102 identifier 20 version 7.0
sccp
!
sccp ccm group 1
associate ccm 10 priority 1
associate ccm 20 priority 2
switchback method graceful
!
dial-peer voice 1 pots
service stcapp
port 0/0
!
dial-peer voice 2 pots
service stcapp
port 0/1
!
dial-peer voice 3 pots
service stcapp
port 0/2
!
dial-peer voice 4 pots
service stcapp
port 0/3
!
dial-peer voice 101 voip
!
line con 0
password cisco
login
no modem enable
line aux 0
line vty 0 4
login
transport input all
!
exception data-corruption buffer truncate
end

VG204#

New Member

VG204 Caller-ID Problem..

Hi

do you have resolve your problem ?

regards

New Member

Re: VG204 Caller-ID Problem..

I didn't .

Customer didn't want to using CID function .

do you have any resolve?

regards.

663
Views
0
Helpful
4
Replies
CreatePlease to create content