Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG224 call pickup issues

Hi,guys. I have a vg224 running mgcp with a ccm(4.1.3sr3). I have configured pickup groups in ccm, but I can not get the analog stations to access the pickup group assign to them. Is there a way or some config I can do on the vg224 to make this to work. Thanks bv

2 REPLIES
Silver

Re: VG224 call pickup issues

This can be done only when VG224 has SCCP Controlled Analog (FXS) Ports. With MGCP, the pickup groups will not work on VG224. http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a0080483a76.html

New Member

Re: VG224 call pickup issues

Hey sbilgi,

Thanks. I did revert to sccp ,not mgcp, and it worked. Thanks for the reply.

197
Views
10
Helpful
2
Replies