cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
282
Views
0
Helpful
1
Replies

VG224 Configuration - Urgent help please

cparapally
Level 1
Level 1

Hi Guys,

For one of my remote locations, I deployed 3825 SRST Router and VG224 for analouge. I have connected few analogue phones to VG224.

CCM is placed in Main branch.

Here is my VG224 config:

ip subnet-zero

ip host ABC01 10.130.X.A

ip host ABC02 10.130.X.B

ip host AVG1 10.143.X.C

no ip dhcp use vrf connected

!

!

!

!

voice-card 0

dsp services dspfarm

!

!

interface FastEthernet0/0

ip address 10.143.X.C 255.255.255.0

duplex full

speed 100

!

interface FastEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

ip default-gateway 10.143.X.Y

ip classless

ip route 0.0.0.0 0.0.0.0 10.143.X.Y

!

ip http server

!

!

!

control-plane

!

!

voice-port 2/0

cptone GB

!

voice-port 2/1

cptone GB

!

voice-port 2/2

cptone GB

!

voice-port 2/3

cptone GB

!

removed voice-ports to make it short

!

voice-port 2/23

!

ccm-manager redundant-host ABC01

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server ABC01 ABC02

ccm-manager config

!

mgcp

mgcp call-agent ABC02 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp fax t38 inhibit

mgcp rtp payload-type g726r16 static

!

mgcp profile default

!

!

!

dial-peer voice 99920 pots

service mgcpapp

port 2/0

!

dial-peer voice 99921 pots

service mgcpapp

port 2/1

!

dial-peer voice 99922 pots

service mgcpapp

port 2/2

!

!

line con 0

logging synchronous

----------------

1) If CCM is down, how can an analogue phone will connect to SRST router for PSTN calls? Is there any configuration I need to put it on VG224 router (like dialer peers, etc) to route the calls to SRST router when the CCM is down?

2) With the above configuration can I forward the calls from analogue to analogue internally, analogue to Cisco IP phone and analogue to PSTN number?

Please correct me if I went wrong with the configuration.

I would appreciate your quick replies.

Many thanks

Mady

1 Reply 1

gogasca
Level 10
Level 10

I would use Sccp for vg224...

http://www.cisco.com/en/US/partner/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1301293

Under SRST the default application wont be sccp anymore will be h323 so yes you need to configure regular dial-peers

But for your mgcp config you are missing SRST commands

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: