VG224 Fax Passthrough not recognizing digits dialed
We are switching from fax relay to fax passthrough on our VG224 fax gateway, however once I make the switch the VG224 stops recognizing dialed digits. When I try to dial a number from a fax machine I get the dial tone and hear the tones for the digits dialed, but after about 5 seconds I get another dial tone and then the call times out. Any thoughts?
This is connected via MGCP to our Callmanager 7 cluster.
I also after making this change cannot receive any inbound calls (just get a busy signal) If I run a debug voip ccapi inout on the VG224 I get the following:
Jun 8 22:32:06.894: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivate:
Re: VG224 Fax Passthrough not recognizing digits dialed
I'll see about posting the config and debugs when I can.
My first thought was the dial peer's were not being matched, but I can make calls if I use T.38 fax relay, but if I switch to fax passthrough (without making any other changes) I lose the digit recognition.
I'm switching from relay to passthrough to avoid some compatibility issues I have been running into with certain fax machines.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
[toc:faq]CUCM Database Replication is an area in which Cisco customers
and partners have asked for more in-depth training in being able to
properly assess a replication problem and potentially resolve an issue
without involving TAC. This document discusse...