We are going to be implementing a fax server (FOIP) and needed to implement T.38 Fax relay. However, since we have done that, we are having a lot of problems with our analog fax machines (connected via VG224 analog gateways). note: analog phones on those VG224 make voice calls just fine. The faxes will connect but then either get a "comm error" or remote side disconnect. We are using CUCM 7.1(5). These are the commands that Cisco helped me perform:
1. Change each VG224 gateway that we currently use to “enable T.38 Fax Relay” within Call Manager.
2. Change our two gateways (Cisco 2811’s) that are gateways to our Telecommunications provider to “enable T.38 Fax Relay”.
3. Telnet to each of the gateways in steps one and two and do the following: a. Configuring CA-Controlled MGCP T.38 Fax Relay i. Use the following steps to configure CA-controlled MGCP T.38 fax relay. ii. SUMMARY STEPS 1. enable 2. configure terminal
3. no mgcp fax t38 inhibit 4. mgcp package-capability fxr-package 5. mgcp default-package fxr-package. 6. –after exiting run “no mgcp” and “mgcp” to restart MGCP.
Ever since we did the above we've seen numerous problems.
This is what part of our VG224 config looked like prior to the above changes (sorry - i don't have the current config but can get it if needed).
no ccm-manager fax protocol cisco
ccm-manager config server 10.0.0.176
ccm-manager config dialpeer-prefix
mgcp call-agent 10.0.0.176 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface FastEthernet0/0
mgcp bind media source-interface FastEthernet0/0
Any thoughts on things we can change/modify to help our issues.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...