Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 Hung Calls



I have a paging system that interfaces with a VG224.  We have an issue where users don't hang up the phone completely after a page and locks out the next person trying to page.  I am looking for a command on the VG224 that will disconnect a call after a set amount of time, like 15 seconds.  Will "timesouts call-disconnect 15" or "timeouts wait-release 15" do the job?



Thanks in advance.  All replies rated.

New Member

I think the paging system

I think the paging system does not release the line, perhaps it does not detect the reorder tone (frequency or rythme)

Please test with an analog phone in place of the paging system.

New Member

Thanks.  The point is that I

Thanks.  The point is that I am sure it is the paging system not hanging up the call.  I am looking for a way to program the voice port to disconnect the call after a set amount of time.  The customer will not fix the paging system nor purchase a new one.

New Member

The voice port can not

The voice port can not disconnect the if the pager physically stays off hook. Did you made a test with a analog phone to hear yourself what is sent on the voice port ?

Try battery-reversal command or try to change the locale of the tone.

Is your voice-port configured in sccp, mgcp or h323 ?

CreatePlease login to create content