Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VG224 in survivable mode

If I set up a remote site as CME-as-SRST, will a VG224 work when the WAN link goes down?

If yes, does it use the same protocol (SCCP/ H.323/ MGCP/ SIP) in both normal and survivable modes?

Lastly, is this different if I use plain SRST?

Regards

2 REPLIES
Hall of Fame Super Gold

Re: VG224 in survivable mode

Yes it will.

You should use SIP or H,323 between VGs and CM. If features are desired, VG224 ports should be configured as SCCP.

MGCP should not be used. If you do, you will encouter many limitations and complications.

Bronze

Re: VG224 in survivable mode

Hi Paolo,

Could you please mention few limitations and complications we can encounter with MGCP for Vg224. We have about 20 VG224 with SCCP and the managment wants to move to MGCP. I would appreciate your input.

Thanks,

MK

280
Views
0
Helpful
2
Replies