Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 integration with CUCM 8

Hi All,

I am new to Cisco IPT.

I would like to integrate Vg224 with CUCM8. The VG224 will be used to connect FAX & Analog Phones.

Could you please let me know which protocol (H323/MGCP/SSCp) should I use to integrate with CUCM.

Regards,

Nirmal

4 REPLIES
VIP Super Bronze

Re: VG224 integration with CUCM 8

SCCP will provide the best line-side feature support.

New Member

Re: VG224 integration with CUCM 8

Thanks for your quick suggestion. I have a small query on it.

Will FAX work fine with SCCP configuration mode ?

Regards,

Nirmal

VIP Super Bronze

Re: VG224 integration with CUCM 8

Yes if properly configured; Fax relay, either Cisco-proprietary or T.38 must be supported by both the VG224 IOS and PSTN gateway. It also must be configured appropriatly.

The Cisco IOS Fax, Modem, and Text Support over  IP Configuration Guide, Release 12.4T is a good place to start.

New Member

Re: VG224 integration with CUCM 8

Thanks for your quick support.

679
Views
0
Helpful
4
Replies
CreatePlease login to create content