Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 IOS upgrade question

How do I sprecify the IOS image I want it to boot from.

The current IOS is running out of slot0:

There is no "flash:" whenI do a show flash.

So I thought I could do

boot system slot0:vg224-i6k9s-mz.124-24.T6.bin

however when I do the below command this is what I get and there is no option for slot0:

xxx-x-0x(config)#boot system ?

  WORD   TFTP filename or URL

  flash  Boot from flash memory

  ftp    Boot from a server via ftp

  mop    Boot from a Decnet MOP server

  rcp    Boot from a server via rcp

  rom    Boot from rom

  tftp   Boot from a tftp server

Any help would be great.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

VG224 IOS upgrade question

I don't recall if the option shows up under help, but you definitely define it as slot, I though it needs to be slot0 though, i.e.

boot system slot0:vg224-i6s-mz.151-3.T2.bin

HTH,

Chris

1 REPLY
Hall of Fame Super Silver

VG224 IOS upgrade question

I don't recall if the option shows up under help, but you definitely define it as slot, I though it needs to be slot0 though, i.e.

boot system slot0:vg224-i6s-mz.151-3.T2.bin

HTH,

Chris

1971
Views
0
Helpful
1
Replies
CreatePlease login to create content