Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Hall of Fame Super Silver

VG224 MOH support

Looking at CUCM SRND Table "Cisco Analog Gateway Features” indicates that MOH is not supported on VG224. Can anyone confirm that this is true for unicast and multicast MOH?

Chris

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

VG224 MOH support

Chris,

MoH on SCCP VG224 is not supported. It is supported with H323/SIP/MGCP as per following -

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/moh.html#wp1043577

HTH

Udit

Cisco Employee

VG224 MOH support

Chris,

Unicast with SCCP will work.

MCast won't work because of  -

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsb60015

The above bug is not the reason but just a confirmation tha MCast is not supported.

Thanks,

Udit

5 REPLIES
Cisco Employee

VG224 MOH support

Chris,

MoH on SCCP VG224 is not supported. It is supported with H323/SIP/MGCP as per following -

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/moh.html#wp1043577

HTH

Udit

Hall of Fame Super Silver

VG224 MOH support

Yeah, I saw that, but since it lists both unicast/multicat support I was not sure if this was the case for either one or both.

Thanks,

Chris

Cisco Employee

VG224 MOH support

I can say that for sure that Multicast is not supported with SCCP. Let me confirm about Unicast.

Udit

Cisco Employee

VG224 MOH support

Chris,

Unicast with SCCP will work.

MCast won't work because of  -

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsb60015

The above bug is not the reason but just a confirmation tha MCast is not supported.

Thanks,

Udit

Hall of Fame Super Silver

VG224 MOH support

Thanks.

Chris

627
Views
0
Helpful
5
Replies
CreatePlease login to create content