11-29-2009 10:35 PM - edited 03-18-2019 10:51 AM
Hey Guys any reason why a bunch of VG224's wont register themselves to a subscriber during fail over? All ip phones and cipc work fine but VG's didnt register.
Any clues?
Solved! Go to Solution.
11-30-2009 01:10 AM
Hi,
Since you havent posted your configs, I think they should look like this for proper working:
!
sccp local FastEthernet0/0
sccp ccm
sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!
!
stcapp ccm-group 1
stcapp
!
Please post your configs and show sccp output if above config already exists.
Pratik
11-29-2009 11:47 PM
What would be the CM version and IOS version on VG?
Is this VG integrated with CM as SCCP or MGCP?
11-30-2009 12:33 AM
CUCM - 6.1.2.1002-1
VG - 12.4(15)T6 SCCP
11-30-2009 01:17 AM
Do you have the version keyword in the "sccp ccm" command on the VG?
Check - http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_s01.html#wp1293447
11-30-2009 01:10 AM
Hi,
Since you havent posted your configs, I think they should look like this for proper working:
!
sccp local FastEthernet0/0
sccp ccm
sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!
!
stcapp ccm-group 1
stcapp
!
Please post your configs and show sccp output if above config already exists.
Pratik
11-30-2009 12:10 PM
Are the Databases in Synch? Sounds like a DB Synch issue to me.
Liam
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: