Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 not registering with subscriber during failover

Hey Guys any reason why a bunch of VG224's wont register themselves to a subscriber during fail over? All ip phones and cipc work fine but VG's didnt register.

Any clues?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: VG224 not registering with subscriber during failover

Hi,

Since you havent posted your configs, I think they should look like this for proper working:

!
sccp local FastEthernet0/0
sccp ccm identifier 1 version

sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!

!
stcapp ccm-group 1
stcapp
!

Please post your configs and show sccp output if above config already exists.

Pratik

5 REPLIES
Cisco Employee

Re: VG224 not registering with subscriber during failover

What would be the CM version and IOS version on VG?

Is this VG integrated with CM as SCCP or MGCP?

New Member

Re: VG224 not registering with subscriber during failover

CUCM - 6.1.2.1002-1

VG - 12.4(15)T6 SCCP

Cisco Employee

Re: VG224 not registering with subscriber during failover

Do you have the version keyword in the "sccp ccm" command on the VG?

Check - http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_s01.html#wp1293447

New Member

Re: VG224 not registering with subscriber during failover

Hi,

Since you havent posted your configs, I think they should look like this for proper working:

!
sccp local FastEthernet0/0
sccp ccm identifier 1 version

sccp ccm identifier 2 version
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0
associate ccm 1 priority 1
associate ccm 2 priority 2
!

!
stcapp ccm-group 1
stcapp
!

Please post your configs and show sccp output if above config already exists.

Pratik

New Member

Re: VG224 not registering with subscriber during failover

Are the Databases in Synch? Sounds like a DB Synch issue to me.

Liam

610
Views
0
Helpful
5
Replies