Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 Not Resgistering Completly with CUCM 6.1

Can anyone tell me what does this mean?

I have several VG224 registered using SCCP to a CUCM 6.1, everything is working however im still getting this error in the CUCM.

AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Active Call Manager: 172.26.224.11, Port Number: 2000

TCP Link Status: NOT_CONNECTED, Device Name: AN1E4A5390D9FFF

Reported Max Streams: 0, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 20

In the RTMT i get the following msg.

CCM_CALLMANAGER-CALLMANAGER-3-DeviceTransientConnection : Transient connection attempt. Device IP address. [String] Device name [Optional]. [String] Device MAC address [Optional]. [String] Protocol. [String] Device type. [Optional] [Enum]Reason Code [Optional]. [Enum]Connecting Port [UInt] Registering SIP User. [Optional]. [String]

SCCP_GATEWAY_VIRTUAL_PHONE -- AuthenticationError

2 REPLIES
Green

Re: VG224 Not Resgistering Completly with CUCM 6.1

Looks like not all the ports are configured

Please double check that in CCM Admin you will see ?

Please check proper config:

http://www.cisco.com/en/US/partner/docs/ios/12_4t/12_4t2/ht1vg224.html

New Member

Re: VG224 Not Resgistering Completly with CUCM 6.1

Exactly, not all ports are configured in the CCM as i dont need to use them right now, is this the reason im getting this error?

684
Views
0
Helpful
2
Replies