vg224 recommendation for fax passthrough , and srst
I have a vg224 running mgcp and it works great. Howerver we have also requierments to configure the vg224 also with srst. I read through the posts that sccp works with srst but has issues with fax passthrough.
If I wanted to keep the mgcp configuration and utilize srst is there a sample config. any issues you guys ran encountered?
Re: vg224 recommendation for fax passthrough , and srst
If the link is broken between MGCP and the CCM the VG 224 will not be able to do fax capabilities. If you configure VG224 with a H.323 load ,VG224 defaults to H323 if it loses its MGCP link to CCM . VG 224 will register to the SRST Gateway as H323 devices and therefore be able to negotiate fax capabilities.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...