We are installing a two site UCM Business Edition solution. Main site single gateway will be setup as h323 gateway (due to need to run T.37/tcl scripts - to get faxes to emails).
We also have a vg224 at main site that will have faxes, modem and polycom conference stations off it. My question is, is the easiest way to set this vg224 up is as a sccp gateway registered to CCM? If so, can it still allow modem/fax passthrough? Or is modem/fax passthrough only allowed on h323
If you recommend h323 for VG224, do I simply point all dial-peers to the h323 main gateway that will have our PRI connected to it? So aside from virtual dial-peers that are created for devices connected, is it just voip dial-peers pointing to the h323 gatway (and not to CCM)? We do want supplementary services for analog phones/conference stations.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...