VG224 ringing problem with Alcaltel D448 FXO/FXS cards
Can not get the Alcaltel FXO card to detect ringing coming from VG224 port. The Alcaltel FXO card works fine using an analog port from Nortel PBX or Verizon POTs line. On the VG224 voice port, I tried changing the ring frequency, ring dc-offset voltage, idle-voltage, ring cadence, reversed the tip/ring connections, all with no help. All other functions with VG224 and the Alcaltel FXO/FXS are working. Any thoughts on what else to check?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...