Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

vg224's analog no dial tone,only buzzer

i am installing vg224 and ccm 5.1,now find something trouble with vg224 that is a few of analog telephone no dial tone only buzzer,i already set the voltage of the vg224 port to "high"(the default is "high" ),follow the runing-config:

!

stcapp ccm-group 1

stcapp

!

voice-port 2/0

cptone CN

station-id number 9600

caller-id enable

!

!

dial-peer voice 500 pots

service stcapp

port 2/0

!

!

please give me some advice ,thanks a lot!

4 REPLIES
Community Member

Re: vg224's analog no dial tone,only buzzer

i have searched all of the document,but can not find the true yet,it is only my problem?

Re: vg224's analog no dial tone,only buzzer

Hi,

Try with this IOS vg224-i6s-mz.124-2.T5.bin

Which one are you using?

BR,

Stoyan

Bronze

Re: vg224's analog no dial tone,only buzzer

I haven't used a VG224. I have a VG248. On the VG248 you have to enable the individual ports. You might want to telnet into the VG224 and check to see if the ports are enabled.

Larry

Community Member

Re: vg224's analog no dial tone,only buzzer

thanks for your message,but the circs random appear, not always one port

302
Views
0
Helpful
4
Replies
CreatePlease to create content