Does anyone have a sample SCCP configuration for a VG224 Gateway? I have the device set up in CallManager, but I know my configuration on the Gateway is probably not right. Can anyone help? Thanks
Give this a try
Thanks for the reply...however this configuration is for MGCP, does anyone have one for SCCP?
stcapp ccm-group 1
sccp local FastEthernet0/0
sccp ccm 184.108.40.206 identifier 1
sccp ccm 220.127.116.11 identifier 2
sccp ccm group 1
associate ccm 1 priority 1
associate ccm 2 priority 2
dial-peer voice 1pots
dial-peer voice 2 pots
PS: please remember to rate posts!
It's still not working correctly. Is there more to this config that is missing? As soon as I pick up the handset I get a busy signal.
Can you paste a sh sccp output ?.
SCCP Admin State: UP
Gateway IP Address: 10.1.40.6, Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.1.40.11, Port Number: 2000
Priority: N/A, Version: 3.1, Identifier: 11
Call Manager: 10.1.40.10, Port Number: 2000
Priority: N/A, Version: 3.1, Identifier: 10
SCCP application services(dspfarm profiles) are not enabled
or haven't associated to SCCP CCM group
Alright, got this working now. Anyone looking to do this configuration, please refer to this document.