09-04-2013 03:42 AM - edited 03-16-2019 07:12 PM
Hi,
is there some corresponding command to "mgcp voice-quality stats" for SCCP-controlled FXS ports?
I am missing CMR from these endpoints in CAR and CUSM. Though I don't think DSP may generate a MOS value, it should send Jitter, Lost Packets etc towards CUCM.
Thanks
Sebastian
Solved! Go to Solution.
09-07-2013 11:59 PM
Hi Sebastian,
Could not find any corresponding commands for SCCP controlled FXS ports, however found the following
http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCeh58624&parentprogram=QDDTS
FRE:For AnalogSkEndpoints to Support SkinnyStationStatistics Message
To Monitor the Call Statistics, we need analog skinny endpoints to support the StationConnectionStatistics Message. However, analog skinny endpoints currently do not support this message.
CSCeh58624 is an enhancement defect to request this functionality to be incorporated for Analog Skinny Endpoints.
The enhancement is still open.
Manish
09-07-2013 11:59 PM
Hi Sebastian,
Could not find any corresponding commands for SCCP controlled FXS ports, however found the following
http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCeh58624&parentprogram=QDDTS
FRE:For AnalogSkEndpoints to Support SkinnyStationStatistics Message
To Monitor the Call Statistics, we need analog skinny endpoints to support the StationConnectionStatistics Message. However, analog skinny endpoints currently do not support this message.
CSCeh58624 is an enhancement defect to request this functionality to be incorporated for Analog Skinny Endpoints.
The enhancement is still open.
Manish
09-08-2013 11:48 PM
Hi Manish,
thanks for your reply.
Unfortunately I cannot open that defect due to issues with bug tracker.
Sebastian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: