Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VG224 SCCP Voice Quality Stats

Hi,

is there some corresponding command to "mgcp voice-quality stats" for SCCP-controlled FXS ports?

I am missing CMR from these endpoints in CAR and CUSM. Though I don't think DSP may generate a MOS value, it should send Jitter, Lost Packets etc towards CUCM.

Thanks

Sebastian

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

VG224 SCCP Voice Quality Stats

Hi Sebastian,

Could not find any corresponding commands for SCCP controlled FXS ports, however found the following

http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCeh58624&parentprogram=QDDTS

FRE:For AnalogSkEndpoints to Support SkinnyStationStatistics Message

To Monitor the Call Statistics, we need analog skinny endpoints to support the StationConnectionStatistics Message. However, analog skinny endpoints currently do not support this message.

CSCeh58624 is an enhancement defect to request this functionality to be  incorporated for Analog Skinny Endpoints.

The enhancement is still open.

Manish

2 REPLIES
Cisco Employee

VG224 SCCP Voice Quality Stats

Hi Sebastian,

Could not find any corresponding commands for SCCP controlled FXS ports, however found the following

http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCeh58624&parentprogram=QDDTS

FRE:For AnalogSkEndpoints to Support SkinnyStationStatistics Message

To Monitor the Call Statistics, we need analog skinny endpoints to support the StationConnectionStatistics Message. However, analog skinny endpoints currently do not support this message.

CSCeh58624 is an enhancement defect to request this functionality to be  incorporated for Analog Skinny Endpoints.

The enhancement is still open.

Manish

New Member

VG224 SCCP Voice Quality Stats

Hi Manish,

thanks for your reply.

Unfortunately I cannot open that defect due to issues with bug tracker.

Sebastian

230
Views
0
Helpful
2
Replies
CreatePlease to create content