cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
910
Views
0
Helpful
4
Replies

VG224 SRST

volgaprbb
Level 1
Level 1

Good day!

There is router 2851 with SRST and vg224. VG224 at loss CCM does not move to SRST, but ip phone 7940 connected to 2851 works correct without CCM. Where mistake in adjustment vg224?

See attachment (c2851,vg224)

4 Replies 4

volgaprbb
Level 1
Level 1

I see at event viewer on CCM:

Event Type: Error

Event Source: Cisco CallManager

Event Category: None

Event ID: 3

Date: 2/21/2007

Time: 7:35:47 PM

User: N/A

Computer: CC-CCM1

Description:

Error: DeviceTransientConnection - Transient connection attempt.

Connecting Port: 2000

Device name [Optional].: AN19E8B9B7DD400

Device IP address.: 192.168.39.2

Device type. [Optional]: 30027

Reason Code [Optional].: 1

App ID: Cisco CallManager

Cluster ID: CC-CCM0-Cluster

Node ID: 192.168.20.239

Explanation: A connection was established and immediately dropped

before completing registration. Incomplete registration may indicate

a device is rehoming in the middle of registration. The alarm could

also indicate a device misconfiguration, database error, or an

illegal/unknown device trying to attempt a connection.

Recommended

Action: No action is required if this event was issued as a result

of a normal device rehome..

And I see on VG224:

debug sccp packets

*Mar 2 19:37:32.333: sccp_print_hex_msg: Len:28 Hex:14 00 00 00 00 00 00 00 2C 00 00 00 4B 75 00 00 00 00 00 00 00 00 00 00 00 00 00 00

*Mar 2 19:37:32.333: sccp_transmit_msg: sending on socket 0

*Mar 2 19:37:32.365: sccpapp_process_socket_events: appl_type 4, soc_fd 0, soc0, swb_soc -1

*Mar 2 19:37:32.365: sccpapp_process_socket_events: TCP_SOCKET_READ: appl_type4, eve 4, state 3

*Mar 2 19:37:32.365: sccp_get_control_message: bytes_to_read 8, bytes_read 8, appl_total_bytes 8, appl_bytes_read 8, soc_read_mode 0, soc 0

*Mar 2 19:37:32.365: sccp_get_control_message: bytes_to_read 36, bytes_read 36, appl_total_bytes 36, appl_bytes_read 36, soc_read_mode 1, soc 0

*Mar 2 19:37:32.365: sccp_get_control_message: sccp cntl msg rcvd, prof_id 0, appl_type 4, msg_len 36

*Mar 2 19:37:32.365: sccp_parse_control_msg: msg_ptr 631CBEBC, msg_len 36, msg_id 157

*Mar 2 19:37:32.365: SCCP(AN19E8B9B7DD400)rcvd RegisterRejectMessage

*Mar 2 19:37:32.365: sccp_parse_control_msg: rcvd register rej, reason: Error:DB Config

I have got problem with SCCP and after CCM link failed, mgcp on vg224 failed too. I try to adjust service sctapp on dial-peer, but it is not work, since SCCP failed.

What is the IOS running on the VG224 ??

c2800nm-spservicesk9-mz.124-4.T3.bin

vg224-i6s-mz.124-2.T5.bin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: