Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VG224 strange issue

Hello,

I am facing some strange issue with Vg224, the device is added as SIP trunk on CUCM. All incoming and outgoing calls are working fine.

The issue is that when someone calls the analog phone, as soon the person answer the call he first hear some tone like some digits are dialed and then can hear the other party.

When normally analog phone is picked we get normal dial tone.

Any suggestions are much appreciated.

!

voice-port 2/17

echo-cancel coverage 32

cptone CN

timeouts interdigit 3

station-id number 12345

!

!

dial-peer voice 100 pots

description *** Analog User ***

translation-profile incoming CLASS-NATIONAL-Mobile

destination-pattern 12345

port 2/17

forward-digits all

!

!

Regards,

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

VG224 strange issue

Hi Anil,

You have configured "forward-digits all" under dial peer for FXS port. I suspect the tones you are hearing are DTMF tones of 12345 which is getting forwarded to analog phone because of forward digit all configuration. Kindly try removing "forward-digits all" from dial peer and then check.

Regards,

Mohit Singh

2 REPLIES
Bronze

VG224 strange issue

Hi Anil,

You have configured "forward-digits all" under dial peer for FXS port. I suspect the tones you are hearing are DTMF tones of 12345 which is getting forwarded to analog phone because of forward digit all configuration. Kindly try removing "forward-digits all" from dial peer and then check.

Regards,

Mohit Singh

New Member

VG224 strange issue

Thank you Mohit, You are right. It did fix the issue.

However I had to add no digit-strip cmd under pots dial-peer to make it work.

Thanks again.

146
Views
0
Helpful
2
Replies
CreatePlease login to create content