VG224 with Bulk "feature or method not supported"

[mibrahim1986]

Hi,

Im tring to add some VG224 SCCP gateways via Excel Bat Tool. I Can Create the file format and everything is fine until Im tring to export the Data to BAT file format.

There is an error message: feature or method not supported

I tried it with other devices and it works fine. Only the VG224 doesnt work. What am I doing wrong?

[Rob Huffman]

Hi Mohamed,

If you are running a 6.x version of CCM, which I'm guessing you are, you are likely hitting the Bug referred to by Brent in this recent post.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.2cc1009e/2#selected_message

Hope this helps!

Rob

[mibrahim1986]

Thank you I found out, that it works fine with the 6.0 Bat.xls file. But in the Job Scheduler I still get: "Could not insert new row - duplicate value in a UNIQUE INDEX column"