VG224 with one way audio to IP phones on same vlan
I have a VG224 registered via SCCP to CCM6.1. From FXS to FXS on the VG224 the calls are fine, but from FXS to IP phone I only get one way audio even though DTMF tones pass through in both directions. The VG224 and the IP phones are on the same vlan and so I don't see this being a routing issue. Any idea on what to troubleshoot?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...