Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

VG248 - Some Ports Suspended

CCM is running 4.2(3)sr2 and one VG248 is running 1.3(1) and the other 1.3(1)es8.2. On the problem ports we get the message "SCCP 5: Registration failed: No CM response to soft key template request". There is no dial tone on the port in the VG248. Through telnet, the vg248 shows the port enabled with no phone number. Through HTTP, the port shows suspended. The CCM shows the port registered. CCM for good ports and bad ports are comparable.

107
Views
0
Helpful
0
Replies
CreatePlease to create content