Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vic 2 fxo problem

i have a problem with vic 2 fxo as it is not recognized

i need to know is this problem related to ios or router seires

5 REPLIES
Hall of Fame Super Gold

Re: vic 2 fxo problem

Send output of show ver and show diag. If you have an ISR, you need the PVDM2 module for the card to be recognized.

New Member

Re: vic 2 fxo problem

Hi,

You plug your card in which router?

New Member

Re: vic 2 fxo problem

i have attached the output that appear when i start the router

this problem occured with 2821 and ios C2800NM-SPSERVICESK9-M

u can see the error that appear in the attached file which is

*Sep 27 14:03:06.131: %GT96K_FEWAN-1-UNKNOWN_WIC: NM slot 0, wic card has an unknown id D

so what do u think the reason for that error

Hall of Fame Super Gold

Re: vic 2 fxo problem

I cannot tell exactly what is the problematic hardware because you have not sent output of "show diag".

However, you need to upgrade to IOS 12.4(11)XJ4 for the new hardware to be recognized. You need CCO download access in order to download IOS image, this is done registering a support contract that you can purchase from any cisco reseller.

as a recognition to those providing answers, please rate all useful posts using the scrollbox below!

New Member

Re: vic 2 fxo problem

Think you might need a VIC2-2FXS rather than a VIC-2FXS, as the latter isn't supported by the 2800 platform (but is, for example on the 1700).

172
Views
0
Helpful
5
Replies