Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VIC card for 2811 router

Dear

I have problem with VIC2B-S/T TE card (for ISDN BRI) which I try to connect to 2811 voice router with callmanager express.

IOS version is c2800nm-advipservicesk9-mz.124-20.T.bin and Cisco Unified Communications Manager Express 7.0(0) version.

In sh inventory I can't find VIC2B-S/T TE card, and appears error:

gt96k_mbrd_wic_interrupts_handle: Unexpected WIC intr, wic int status 0x3

in console.

Maybe card is unsupported.

Which VIC card is supported for cisco 2811 voice router?

BR,

Miroslav

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: VIC card for 2811 router

Always use VIC2-2BRI-NT/TE.

The NT feature is optional, default is TE.

5 REPLIES
Hall of Fame Super Gold

Re: VIC card for 2811 router

You may not have the card that you think, or it may be damaged. Also check, "show diag".

New Member

Re: VIC card for 2811 router

Thank you.

This is part of the output of sh diag. Card is VIC-2BRI-S/T-TE=.

WIC Slot 2:

TE BRI Voice daughter card (2 port)

WIC module not supported/disabled in this slot

Hardware revision 1.0 Board revision G0

Serial number 33728859 Part number 800-03803-03

FRU Part Number VIC-2BRI-S/T-TE=

Test history 0x0 RMA number 00-00-00

Connector type Wan Module

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 14 01 00 02 02 A9 5B 50 0E DB 03 00 00 00 00

0x30: 80 00 00 00 05 06 23 01 FF FF FF FF FF FF FF FF

But my router doen't recognize this card. I can't find it in sh inventory.

Is this card supported for 2811?

BR,

Miroslav

Hall of Fame Super Gold

Re: VIC card for 2811 router

You have a VIC- card that is not supported on the 2811. You need a VIC2- card. See:

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

New Member

Re: VIC card for 2811 router

Which VIC2 card I can use, similar as VIC2-2BRI-NT/TE, but without network termination (NT), for European standrar use?

BR,

Miroslav

Hall of Fame Super Gold

Re: VIC card for 2811 router

Always use VIC2-2BRI-NT/TE.

The NT feature is optional, default is TE.

1042
Views
0
Helpful
5
Replies