Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VIC Card in 2811

Hi,

How do I tell if my router is recognizing the VIC-2FXO-M1 card I put in it? I want to confirm the card is working, but I don't know how to tell if it is working or recognized since I purchased it used.

Thanks,

Mitch

3 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Gold

VIC Card in 2811

The command "sh inventory" should be the first step.

VIP Purple

VIC Card in 2811

Hi Mitchell,

In addition to what Mr Leo has said, u can also try show diag and also need to have Voice image .You should get the output something like Unknown Port Adaptor.

But ,I doubt the card is supported on 2800 series.

Please check the links

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

regds,

aman

Cisco Employee

VIC Card in 2811

Aman seems to be right, this module is not supported on 28XX series

Voice Hardware Compatibility Matrix (Cisco 17/26/28/36/37/38xx, VG200, Catalyst 4500/4000, Catalyst 6xxx)

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
8 REPLIES
Hall of Fame Super Gold

VIC Card in 2811

The command "sh inventory" should be the first step.

VIP Purple

VIC Card in 2811

Hi Mitchell,

In addition to what Mr Leo has said, u can also try show diag and also need to have Voice image .You should get the output something like Unknown Port Adaptor.

But ,I doubt the card is supported on 2800 series.

Please check the links

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

regds,

aman

Cisco Employee

VIC Card in 2811

Aman seems to be right, this module is not supported on 28XX series

Voice Hardware Compatibility Matrix (Cisco 17/26/28/36/37/38xx, VG200, Catalyst 4500/4000, Catalyst 6xxx)

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a00800e73f6.shtml


Br,
Nadeem 

Please rate all useful post.

Br, Nadeem Please rate all useful post.
New Member

VIC Card in 2811

I get this when I run 'sh inventory'

PID: CISCO2811         , VID: V03 , SN: FTX2341A07T

Well that sucks if it doesn't support it. I was told it would because originally it had a T1 card in it and it has 4 WVIC slots 0-3.

I also have a 2821, but it doesn't have an IOS on it yet, waiting for the memory and CF card to arrive to update it.

New Member

VIC Card in 2811

I also ran 'sh diag' and I got this result:

WIC Slot 0:

        Unknown WAN daughter card

        WIC module not supported/disabled in this slot

        Hardware revision 1.0           Board revision F0

        Serial number     30276198      Part number    800-05298-01

        FRU Part Number     VIC-2FXO-M1=

        Test history      0x0           RMA number     00-00-00

        Connector type    Wan Module

        EEPROM format version 1

        EEPROM contents (hex):

          0x20: 01 2B 01 00 01 CD FA 66 50 14 B2 01 00 00 00 00

          0x30: 78 00 00 00 03 03 28 01 FF FF FF FF FF FF FF FF

New Member

VIC Card in 2811

Well, is there any VOIP card that will work in the 2800 (2811 or 2821) routers?

Thanks!

New Member

VIC Card in 2811

Does anyone have a suggestion for a VOIP device that is compatable with this card I can get on Ebay for relatively cheap? I see the list from this page, but it looks like some of the models need a special memory module to get as well:

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800b53c7.shtml

Thanks all. I'd rather get the best item I can from the compatability list for the card, since it looks like most of them are relatively cheap, barring they don't require the additional memory DSP module.

VIP Purple

VIC Card in 2811

Hi Mitchell,

you can check your requirement from the above mentioned links.

Routers/Gateways
Model28012811, 2821, 2851
Voice Network Module (right)Not UsedNM-HD-1V 1NM-HD-2V 1NM-HD-2VE2NM- HDVNM- HDV2Chassis slot
VIC (below)
VIC-2FXO, EUNoNoNoNoNoNo
VIC-2FXO-M1/M2/M3NoNoNoNoNoNo
VIC-2FXSNoNoNoNoNoNo
VIC-2E/MNoNoNoNoNoNo
VIC-2BRI-S/T-TENoNoNoNoNoNo
VIC-2BRI-NT/TENoNoNoNoNoNo
VIC-2DIDYesYesYesNoYesYes
VIC-2CAMANoNoNoNoNoNo
VIC-1J1NoNoNoYesYesNo
VIC-4FXO-M1NoNoNoNoNoNo
VIC-4FXS/DIDYesYes3Yes3NoYes3Yes3
VIC2-4FXO (FXO/CAMA)YesYesYesNoYesYes
VIC2-2FXO (FXO/CAMA)YesYesYesNoYesYes
VIC2-2FXSYesYesYesNoYesYes
VIC2-2E/MYesYesYesNoYesYes
VIC2-2BRI- NT/TEYesYesYesNoYesYes
VWIC-xMFT-E1 (with or without DI)YesNoYesYesYesYes
VWIC-1MFT-G703YesNoNoNoYesYes
VWIC-2MFT-G703YesNoNoYesYesYes
VWIC-xMFT-T1 (with or without DI)YesNoYesYesYesYes

as far as Memory and Flash is concerned, install ipvoice image with yor existing DRAM/Flash & check.

regds,

aman

276
Views
0
Helpful
8
Replies
CreatePlease to create content