01-19-2014 10:29 PM - edited 03-16-2019 09:19 PM
Do I need an external DSU if I am using VIC2-2BRI-NT/TE cards?
Solved! Go to Solution.
01-19-2014 11:49 PM
Hi Jacob,
I was just reading the link shared with you :
External DSU is required in both cases whether u configure it as User or Network .
regds,
aman
01-19-2014 10:57 PM
Hi Jacob,
As per the datasheet , it is configurable for S/T or U side.You can check the link
regds,
aman
01-19-2014 11:09 PM
Hi Aman,
Thanks for the quick reply. Can you just confirm that this configuration will be used in place of a DSU?
I'm still not super hip to all the voice lingo.
01-19-2014 11:49 PM
Hi Jacob,
I was just reading the link shared with you :
External DSU is required in both cases whether u configure it as User or Network .
regds,
aman
01-20-2014 12:32 AM
Thanks for the confirmation Aman. I guess I need to go get some DSUs for these.
08-20-2014 09:01 PM
Hi aman,
I am having the same issue as Jacob. In many product descriptions of the card, I find the following sentence:
(VIC2-2BRI-NT/TE) have the same capabilities as the S/T card, but can also be configured to provide a network termination (NT) interface with phantom power.
So if I could configure the card to provide network termination, why would I need an external DSU? What would be its purpose?
Regards,
Chris
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: