Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VIC2- 4FXO always busy

Dear All,

Somebody can tell me what is the problem with my VIC card?

My cisco 2801, 2 VIC2-4FXO card, 2FastEthernet, 1 Serial.

My problem is the extension phone line that connected from PABX always busy when I connected it into my VIC2- 4FXO card, but when I check on the cisco there is no light on the VIC port that I have connected that phone line.

And If I take that phone line out of the VIC port and connect into the phone, it's working well and no busy.

Can somebody tell me what wrong with Cisco and VIC card?

Your reply are very appreciated.

Best Regards;

Boly

5 REPLIES
Hall of Fame Super Gold

Re: VIC2- 4FXO always busy

Hi, please send output fo "show voice port summary".

New Member

Re: VIC2- 4FXO always busy

Dear p.bevilacqua,

Thanks for your reply.

please find attached of my voice port summary.

Best Regards;

Boly

Hall of Fame Super Gold

Re: VIC2- 4FXO always busy

Hi, the first six ports should be working, please enable "debug vpn signal" when trying a call.

New Member

Re: VIC2- 4FXO always busy

Thanks, now I already enable "debug vpm signal", and now all my port is working well.

thanks again.

But I still have another one problem that sometime when calling and after we stop conversation and drop the phone, but the line still busy and light of that port still on.

can you help me to give me some advise.

Best Regards;

Boly

New Member

Re: VIC2- 4FXO always busy

This seems some problem with disconnect supervision

try reading this

http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800ae2d1.shtml

thanks and regards

325
Views
0
Helpful
5
Replies
CreatePlease login to create content