Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VIC2-4FXO - Caller ID works with CME, but not CCM7

Have a VIC2-4FXO card installed in a Cisco 3725.  Caller ID works when the unit is in CME mode, but cannot get it to work with CallManager.

I'm scratching my head here, but can't figure out what I'm missing.

Any ideas?              

Everyone's tags (1)
7 REPLIES
Hall of Fame Super Gold

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

Are you using H.323 or MGCP with CM ?

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

MGCP.  I guess I could convert it to H323, but that's annoying to have to do that.  It seems like this should work.

Hall of Fame Super Gold

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

MGCP, among other limitations, does not support CLID.

So, if you want CLID, you will have to convert.

Cisco Employee

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

CUCM 8.x now supports CLID with MGCP FXOs, however, any previous version if you want CLID you need H323.

Caller ID Support on MGCP FXO Gateways

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/8_0_1/delta/cmadmin.html#wp1115153

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

Interesting, but the documentation doesn't match what the interface actually has.  I set up an 8.0.2c box in the lab, and tried this out.

This is a VIC2-4FXO in a 3725 gateway.  There is no box to enable caller id in the port configuration as described in the document.

Sounds like some feature either got removed, or the documentation is incorrect.  It's not there.    

Hall of Fame Super Gold

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

You have a solid, flexible and standard alternative in using H.323 or SIP.

Why you want to fight with MGCP instead ?

Cisco Employee

Re: VIC2-4FXO - Caller ID works with CME, but not CCM7

3725 is EOS. latest version of IOS in other routers (28xx,38xx) supports the FXO caller id feature for mgcp gw

859
Views
3
Helpful
7
Replies
CreatePlease to create content