Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

VIC3-2FXS/DID VS VIC3-2FXS-E/DID

hi all,

we'll upgrade our router from 2811 to 2911.

the current 2811 uses VIC2-2FXS but saw on cisco's website that we need a VIC3 instead.

i saw there's two versions of this card, the other has an 'E'.

what's the difference between the two? can i just get a VIC3-2FXS/DID?

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi John,Yes, you can use VIC3

Hi John,

Yes, you can use VIC3-2FXS/DID with 2900 series routers.

HTH

Manish

4 REPLIES
Cisco Employee

Hi John,The difference is

Hi John,

The difference is explained in the following link

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ip-communications-voice-fax-network-modules/product_data_sheet0900aecd801c595e.html

VIC3-2FXS-E/DID is designated as an "Off-Premise Extension Lite" product offering. This means that while the module addresses a subset of the off-premise extension applications, it should be noted that the module is not in full compliance for off-premise usage.

HTH

Manish

 

hi manish,thanks for the link

hi manish,

thanks for the link! i'm not really a voice guy so my other question is that, can i just get a VIC3-2FXS/DID instead?

 

Cisco Employee

Hi John,Yes, you can use VIC3

Hi John,

Yes, you can use VIC3-2FXS/DID with 2900 series routers.

HTH

Manish

thanks for confirming!

thanks for confirming!

157
Views
0
Helpful
4
Replies