We have a small Office that has a single pots line. Phone number is 9633000. We want to use a 2811XM router with IOS version 2.4(20)T and a VIC4FXS/DID module. The Office will have 10 Cisco IP Phones installed. The phones will take inbound calls from the PSTN and make outbound calls to the PSTN using this gateway.
The office is connected to a Corp network with CallManager 6.1. The phones will be registered to CallManager. CCM's IP address is 10.1.10.60.
The phones will have a shared ext on them that should ring when a call comes in from the PSTN to 9633000
Eventually what we would like is for the inbound call from the PSTN to 9633000 to be a CTI RP in CallManager that is directed to a Unity Auto Attendant. Then based on the caller's selection in the AA we could route to the same 10 IP phones internal DN's.
Can you provide assistance with the initial setup to allow the VIC4FXS module to take incoming calls to the shared line on the 10 phones?
I am having issues finding sample config docs for this setup. When I search for VIC4FXS I am only finding samples from 17xx routers and the commands do not appear to work. I have no voice-port command available.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...