Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Video calls between internal Cisco 8941 Phones and/or Jabber

Hi all,

Recently there are new Cisco 8941 Phones and Jabber added to Cisco IPT system.

Just wonderring what the CUCM & phone configuration are required,  in order to make video calls between Cisco 8941 Phones and/or Jabber.

Any configuration and operation guide for this?    Thank you,

Master001

3 REPLIES

Video calls between internal Cisco 8941 Phones and/or Jabber

Cisco 8941 phones cannot receive a video call but between jabber and jabber video is possible but only with Softphone mode.

First Configure the usuall cisco jabber deskphone to shareline with a physical phone

after follow the steps in the below link.

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/mac/8.6/b_jabber_mac_admin_guide_chapter_010.html#task_A67673D507354D528CB4B8849B0D53C7

And

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/9_0_1/ccmcfg/CUCM_BK_CDF59AFB_00_admin-guide-90_chapter_01101001.pdf

Please rate if info is useful.

New Member

Video calls between internal Cisco 8941 Phones and/or Jabber

thanks for the reply Zekeria.  However, 8941 should be able to make and receive video calls.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10451/ps11157/data_sheet_c78-649593.html

Just wonder if any configuratoin required in CUCM?    And the steps to establish video calls ?    as I don't have 8941 on my hand now.    Thanks!

Video calls between internal Cisco 8941 Phones and/or Jabber

My bad, We have 9951 and 9971 and the only configurations changes that were made was to enable "Video Capability" Section in the phone or at enterprise phone parameters and they worked.

543
Views
0
Helpful
3
Replies