I want to know if the cisco video Ip Phone (CP-7985) and do multiconferencing i.e Videoconferecing with more than two sites and all involved participants are shown on the screen. If possible, what's the technology behind it? Does the MCU come into play here?
Thanks for the information. If MCU must be used, where will it be install? On the Callmanager or the IP Phone (CP-7985) itself. Can this be done with a callmanager express? If so, where will the MCU be run on the Express?
the MCU would be another server that connects to the call manager.it will have its own software etc and just does an integration to the CCM. have not done any research on call manager express however it should be the same logical integration so it shouoldnt matter. have a look at this
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...