Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our beta test area to get started.

New Member

View Available PRI Channels

I'm sure this is fairly simple but i haven't been able to figure it out. I have a PRI and we are currently getting busy signals, it doesn't seem like there are 23 concurrent calls going on and i wanted to see if there is a show command i can enter in the router that will show me how many calls there currently are or how many of the PRI channels are in use. Any help is greatly appreciated.

  • IP Telephony
1 ACCEPTED SOLUTION

Accepted Solutions

Re: View Available PRI Channels

Hi,

show voice call summary

show voice port summary

show isdn status

show isdn service

That should do you in pretty good.

-nick

3 REPLIES

Re: View Available PRI Channels

Hi,

show voice call summary

show voice port summary

show isdn status

show isdn service

That should do you in pretty good.

-nick

New Member

Re: View Available PRI Channels

#sh isdn service

PRI Channel Statistics:

ISDN Se0/1/0:23, Channel [1-24]

Configured Isdn Interface (dsl) 0

Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)

Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4

State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3

Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)

Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4

State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2

The 0's indicate idle channels, if there are 2's, the channels are busy.

New Member

Re: View Available PRI Channels

Thanks guys, that's exactly what I was looking for.

124
Views
5
Helpful
3
Replies