Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Visibility of Dynamic Hunt Groups

Hi All,

I'm obviously aware of the use of dynamic huntgroups; is there any method of knowing how many endpoints happen to be in or out of the linegroup at any moment in time?

Cheers,

Stu

3 REPLIES
Cisco Employee

Re: Visibility of Dynamic Hunt Groups

Hi!

You can use the show ephone-hunt command to display current hunt group members, including those who joined the group dynamically. Please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_e1ht.html#wp1024368

Hope this helps! If it does, please rate :)

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
New Member

Re: Visibility of Dynamic Hunt Groups

Hi Teresa,

Sorry, I should have said this is a CUCM solution and not 'Express'

Cheers,

Stu

Cisco Employee

Re: Visibility of Dynamic Hunt Groups

Hi Stu,

Unfortunately this feature is only available for CME. Please refer to:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Regards,

Teresa.

Regards, Tere. If you find this post helpful, please rate! :)
125
Views
0
Helpful
3
Replies
CreatePlease to create content