07-14-2009 08:52 AM - edited 03-15-2019 06:58 PM
Hi All,
I'm obviously aware of the use of dynamic huntgroups; is there any method of knowing how many endpoints happen to be in or out of the linegroup at any moment in time?
Cheers,
Stu
07-14-2009 09:08 AM
Hi!
You can use the show ephone-hunt command to display current hunt group members, including those who joined the group dynamically. Please refer to:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_e1ht.html#wp1024368
Hope this helps! If it does, please rate :)
Teresa.
07-15-2009 04:39 AM
Hi Teresa,
Sorry, I should have said this is a CUCM solution and not 'Express'
Cheers,
Stu
07-15-2009 06:43 AM
Hi Stu,
Unfortunately this feature is only available for CME. Please refer to:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html
Regards,
Teresa.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: