Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Visio Stencils for MCS 7800 Series

Hi,

Can anyone post a link or redirect me where I can find visio stencils for the MCS 7800 series. I have google'ed but could not seem to find,

Thank you,

Pete

6 REPLIES

Visio Stencils for MCS 7800 Series

Hi Pete,

I am not sure that you will find any up to date Visio stencils for MCS servers.

You could download the HP/IBM server stencils from Visiocafe and maybe ungroup the shape and change the fill colour so that they look like Cisco servers

http://www.visiocafe.com/ibm.htm

New Member

Re: Visio Stencils for MCS 7800 Series

Hi James,

Thank you for your response, would u able to tell me which one in HP/IBM would at least appear to look like the MCS. I'm doing a review for a client and I would want to add a complete layout of their racks to my report.

Cheers/Pete

Visio Stencils for MCS 7800 Series

Hi,

If you look at the HP and IBM links from the page below then you should be able to see which MCS model maps to whcih HP/IBM server.

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/product_solution_overview_list.html

For example from table 2 of the HP link you can find that:

MCS7845-H2 is a rebadged DL380-G5 Server with 4 drives

MCS7835-H2 is a rebadged DL380-G5 Server with 2 drives

MCS7825-H3 is a rebadged DL320-G5 Server with 2 drives

and so on.

New Member

Visio Stencils for MCS 7800 Series

Thanks James,

Will use one of those...thank you  for your assistance

Re: Visio Stencils for MCS 7800 Series

Have a look here if you have not:

http://www.cisco.com/web/about/ac50/ac47/2.html

Particularly, the Visio Stencils link at the bottom.

-- please remember to rate and mark answered helpful posts --
New Member

Re: Visio Stencils for MCS 7800 Series

Thanks Brandon, however that link does not have the stencil for MCS 7800 series...

18199
Views
0
Helpful
6
Replies
CreatePlease to create content