Hi all, trying to get voice connect to work, unsuccessfully so far.. obviouisly there is a relationship between voice connect and voice access/enterprise feature access. I've found documentation that says VA /EF only works through h323 gateways, is this the case with VC as well. We only have mgcp gateways so....
If Voice Conenct is Single Number Reach then it does work with MGCP as I`ve just set it up on my cucm. What error are you having, the CSS which is used to ring out an external DN - only external numbers are permitted.Also the CSS the app. uses is to re-routing CSS and not the CSS in the Remote Destination profile, Destination. the numbers you must enter in the RDP has to include your lcoal PSTN access code
Ring time- Play around with the Delay before Ringing timer in the Remote Destination page set it to zero - should be simultaneous however it also depends on your Route patterns -Any ! settings?. Create a specific Route pattern for an exact match for testing
thanks, the specific route pattern for testing is a good idea, I'll try that.
Access List, are you saying that you don;t have access list function under CUCMAdministrator>device>devicesetting, or that you havn't saw it idsappear before. I'm on a version 7, and it was there, but has now disappeared...
I am assuming you are on version 6. You can configure these parameters at Device > Remote Destination.
Edit the user profile option "Delay Before Ringing Timer" from 4000 (i.e. 4 seconds) to a lesser value as required.
Also note the "Answer Too Soon Timer" option. This is set to 1500 (i.e. 1.5 seconds) so if you set the "Delay Before Ringing Timer" to this value or less you may have issues.
The "Answer Too Soon Timer" option is for safeguarding the caller so as not to send him into a mobile (remote destination) voicemail system and retain the call within the enterprise and send it to Enterprise voice mailbox if required (i.e Unity)
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...