cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
393
Views
0
Helpful
2
Replies

Voice Gateway Number of calls per WAN Interface

darin.marais
Level 4
Level 4

I have seen a post that describes how we can use an SNMP mib to gather information regarding the number of H.323 calls:

1.3.6.1.4.1.9.9.27.1.1.3.1.4 -> "ciscoCallHistoryCalledNumber"

1.3.6.1.4.1.9.9.27.1.1.3.1.5 -> "ciscoCallHistoryInterfaceNumber"

I’d like to find out how many calls on average are placed across the WAN link (G711/G722 or G729) verse the PRI-onramp over a period of time.

I would use a tool such as cacti to store the data but I need to know if there is a MIB for this?

Does anyone on the list have any idea for how this can be done?

Thank in advance

Darin

2 Replies 2

darin.marais
Level 4
Level 4

BUMP!! / hi again / essentially I am asking if there is a way to measure h.225 / h.245 over the WAN from CUCM to gateway over a period of time / any ideas?

Thanks again in advance

Darin

Does it have to be SNMP?  (Of which I know it can be done on an E1).

RTMT does it off the shelf, using performance monitoring. on active calls and or channel usage.

on MIBs check:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801abe59.shtml

ObjectcpmActiveDS0s
OID1.3.6.1.4.1.9.10.19.1.1.4

=============================
Please remember to rate useful posts, by clicking on the stars below.

=============================

Please remember to rate useful posts, by clicking on the stars below.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: