Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Voice gateway pri and dsp

Hello, is there a command on cisco 2800 voice gateway to see how many pri's there is also what is the relationship between pri and dsp. Like how many dsp are there in one pri? Thanks,
4 REPLIES
Green

Haracio, show isdn statusshow

Haracio,

 

show isdn status

show voice dsp

 

Hope this helps

Regards

Alex

Regards, Alex. Please rate useful posts.
VIP Purple

Hi,  You also use the

Hi, 

 

You also use the commands 

 

show voice dsp detailed 

 

show voice dsp group all

 

show isdn service 

regds,

aman

New Member

Hello,So I do show inventory

Hello,

So I do show inventory on voice gateway and it says I it has one pvdm2-32 and two pvdm2-64 which adds up to a total of 160 dsp to use.  However i do show voice dsp group all and it shows 12 dsp each one with 16/16 max singnal/voice channel which is a total of 192 dsp. How many dsp do I really have 192 or 160 to use and another question if i divide 192 by 24 channels its  8 PRI's correct or I'm calcualting the wrong way to get the number of PRI's?

VIP Purple

Hi, PVDM2-32 has 2DSPs while

Hi,

 

PVDM2-32 has 2DSPs while PVDM2-64 has 4 DSPs . In your case, it would be total 10 DSPs.

 

you can also refer the doc by AOK.

https://supportforums.cisco.com/document/123126/cisco-pvdm2-and-pvdm3-dsp-creditmips-allocation

regds,

aman

76
Views
0
Helpful
4
Replies