Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
You may experience some slow load times, errors, and slight inconsistencies. We ask for your patience as we finalize the launch. Thank you.

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

Voice Gateway with E1 R2 for CANTV in Venezuela.

Hi guys,

I’m trying to configure 2 E1 provided from CANTV in Venezuela. One this like Outgoing using R2-DTMF and the other with R2-MFC.

Both E1 circuits were configured like Cisco documentation recommending, however don't work, the call don't is stabilized.

My router details are:

C2951, IOS 15.1.4M and VWIC3-2MFT

controller E1 0/0/0

framing NO-CRC4

ds0-group 0 timeslots 1-15,17-31 type r2-digital dtmf dnis

description Salientes CANTV

controller E1 0/0/1

framing NO-CRC4

ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani

cas-custom 0

country venezuela

answer-signal group-a 6

dnis-complete

description Entrantes CANTV

Thanks in advance for your help.

---

Posted by WebUser Marco Muñoz from Cisco Support Community App

  • IP Telephony
1 REPLY

Voice Gateway with E1 R2 for CANTV in Venezuela.

Can you please share the route config (sh run) to see what is the wrong with the config?

Cheers Bruno Rangel Please remember to rate helpful responses using the stars bellow and identify helpful or correct answers .
337
Views
0
Helpful
1
Replies