I have a Cisco AS5350XM router (1) with 2 t1 voice chnl coming to it , chnl 3/1 works fine user can get call and voice, but on 3/0 the calls lands but there is no voice , on my second voice gateway router (2) I have 3 t1, 3/0 , 3/1 and 2/0 all get calls and voice, any one have and idea, the mistery thing is that the same config for 3/1 on rtr(1) is on 3/0 rtr (1), whe now that port maping is good cause we land a call on the station , we know that the codec is the same as 3/1 wich again working fine , I am out of clues.
#show dial-peer voice summ
TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET STAT PORT
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...