I have configured a hunt group where if no one is available, the called gets sent to the voice mailbox of the pilot number. I want to have it show on the customer's phone when a message has been left in that mailbox, but I'm stuck. Our vm system is Octel. Any suggestions?
One way to do this with Octel is to use a Type-34 Transfer mailbox for the Hunt Pilot #.
Lets say your Hunt Pilot DN is 8777. You can setup a new "hidden" DN (with VM) on the users phone like 2600, create the Greeting that you want for the Hunt Group on 2600. For 8777 setup a Type-34 that is set to Transfer to the 2600 Mailbox. When a call is routed through the Hunt Group (8777) and hits the Octel it will receive the Greeting from 2600 and you will be able to see the visual notification on the user phone.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...