Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

voice-port 0/0/1no caller-id enable

Hi

now i dont' reveived and send call's from CCM and cisco 3825

The status of BRI is ok

ISDN BRI0/0/0 interface

dsl 0, interface ISDN Switchtype = basic-net3

L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 65, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Active dsl 0 CCBs = 0

but when a show ccm-manager , at the end you can see:

MGCP Domain Name: MUTILVACISCO3825.grupopanasa.com

Priority Status Host

============================================================

Primary Registered CALLMANAGER01 (192.30.3.246)

First Backup None

Second Backup None

Current active Call Manager: 192.30.3.246

Backhaul/Redundant link port: 2428

Failover Interval: 30 seconds

Keepalive Interval: 15 seconds

Last keepalive sent: 12:07:15 PCTime Nov 17 2007 (elapsed time: 00:00:03)

Last MGCP traffic time: 12:07:15 PCTime Nov 17 2007 (elapsed time: 00:00:03)

Last failover time: None

Last switchback time: None

Switchback mode: Graceful

MGCP Fallback mode: Not Selected

Last MGCP Fallback start time: None

Last MGCP Fallback end time: None

MGCP Download Tones: Disabled

--More-- Backhaul Link info:

Link Protocol: TCP

Remote Port Number: 2428

Remote IP Address: 192.30.3.246

Current Link State: OPEN

Statistics:

Packets recvd: 2989

Recv failures: 0

Packets xmitted: 2726

Xmit failures: 0

BRI Ports being backhauled:

Slot 0, VIC 0, port 1

Slot 0, VIC 0, port 0

Configuration Auto-Download Information

=======================================

Current version-id: {84423BF3-AFC0-4A37-A9C7-781EA4C959F5}

Last config-downloaded:00:00:00

Current state: Waiting for commands

Configuration Download statistics:

Download Attempted : 18

Download Successful : 16

Download Failed : 0

Configuration Attempted : 10

--More-- Configuration Successful : 10

Configuration Failed(Parsing): 0

Configuration Failed(config) : 0

Last config download command: Reset

Configuration Error History:

voice-port 0/0/1no caller-id enable

voice-port 0/0/0no caller-id enable

voice-port 0/1/1no caller-id enable

voice-port 0/1/0no caller-id enable

voice-port 0/1/1no caller-id enable

voice-port 0/1/0no caller-id enable

voice-port 0/0/1no caller-id enable

voice-port 0/0/0no caller-id enable

this voice-port no caller-id is ok??

this is my problme??

help please.

Regards

Alfonso

3 REPLIES
Silver

Re: voice-port 0/0/1no caller-id enable

Try this BUG - CSCsc00795

Hall of Fame Super Gold

Re: voice-port 0/0/1no caller-id enable

Hi, CSCsc00795 is ¨"CCM MGCPbrid device didn't handle CcSelectFacilityReq message properly" so it doesn't seem aplicable.

Why is that you some often point at unrelated bugs for any kind of issue?

Re: voice-port 0/0/1no caller-id enable

ISDN lines support caller-id by default, and you do not appear to have the option to disable it on the voice-port.

This is not specifically a problem, caller-id is an analogue service which when enabled on FXS ports transmit Caller ID, while FXO ports receive Caller ID.

Regards

Allan.

289
Views
0
Helpful
3
Replies
CreatePlease to create content