Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Voice Recording Setup

I am trying to setup a voice recording system.

Anyways, I have 6 buildings all connected by Fiber. From the fiber we go to a 3560 and each building also has a 2801 with a couple of POTS for failover services.

So I am thinking if I span VLAN 5 (where the phones are) would I then get ALL phones? Or does SPAN (or monitor session) sort of limit itself to one switch?

Any help would be great.

1 REPLY
New Member

Re: Voice Recording Setup

Hi,

Span is local to 1 switch. What you need to use is rspan. You need to configure a dedicated vlan for rpsan and add this vlan to the allowed vlans on the trunk back to your main building where your recorder server will be.

Please see this pdf for more details : http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.1_19_ea1/configuration/guide/swspan.html

Please rate the post if it was helpfull

Kind Regards,

Jeroen

114
Views
5
Helpful
1
Replies