Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Voice Translation Rule Issue

Dear All,

i m running cme 7.1

I need to configure voice translation rule in such a way that

if the user press digit 2 it should get an outside dial tone and will be able to make an outside call.

i configured rule as below

=======================

!

voice translation-rule 2739025

rule 2 /^2/ /19/

!

!

voice translation-profile DirectLine1

translate called 2739025

!

========================

And my dial peer is :

!

dial-peer voice 99999 voip

translation-profile incoming DirectLine1

answer-address 2739025

!

dial-peer voice 9999 pots

answer-address 2739025

destination-pattern 19T

port 0/3/0

!

As per my configuration when i press 2 and make an outside call the gateway gives me a fast busy tone.

but when dial 19 and outside number the call goes fine.

It seems that i am not configuring voice translation rule properly, can you please guide me how i can fix this issue.

Your consideration in this regard will be highly be comendable.

Best Regards,

Malik.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Silver

Voice Translation Rule Issue

Malik,

You typically do not create translation rules for such a purpose. All you need is matching dial peers and telephony-service configuration.

So, build dial-peers that match your possible routes, i.e.

dial-peer voice 1 voip

destination-pattern 2T (2 is exclusively matched so it will be stripped)

port 0/3/0

then under your telephone-service configuration add secondary-dialtone 2 to provide dial tone after user presses 2.

HTH,

Chris

Hall of Fame Super Silver

Voice Translation Rule Issue

You will need to build cor-lists for that.

Here is a good doc on how to do that, it is also described well in CME admin guide as well as many other threads on this forum:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

HTH,

Chris

7 REPLIES
Hall of Fame Super Silver

Voice Translation Rule Issue

Malik,

You typically do not create translation rules for such a purpose. All you need is matching dial peers and telephony-service configuration.

So, build dial-peers that match your possible routes, i.e.

dial-peer voice 1 voip

destination-pattern 2T (2 is exclusively matched so it will be stripped)

port 0/3/0

then under your telephone-service configuration add secondary-dialtone 2 to provide dial tone after user presses 2.

HTH,

Chris

New Member

Voice Translation Rule Issue

Chris,

Many thanks and great idea

i really appreciate your reponse.

i will confgure it accordingly and will get back you.

many thanks

Malik

New Member

Voice Translation Rule Issue

Hi Chris,

Yes  it worked thank you sooooooo much

really grateful to you

thanks a lotttt man

Hall of Fame Super Silver

Voice Translation Rule Issue

You're welcome, glad it worked for you, and thank you for nice rating.

Chris

New Member

Re: Voice Translation Rule Issue

Dear Chris,

You deserve this rating and i appreciate your effort.

Chris after configuring this i come up with another issue.

The thing that i want each user to use a specific port to make an outside call which in my case is not happening.

Using 2T as a destination pattern i am able to make an outside call but the CME router is picking a random port for making an outside call. (Mapping Outbound calls to Unique FXO Port concept)

How can i restrict the user to use a specific FXO port to make an outside call.

Please let me know how i can fix this issue.

I will be very grateful to you.

Please help me in this issue.

I have attached the current show run for my cme after i did the modification explained by you.

Regards,

Mukarram

Hall of Fame Super Silver

Voice Translation Rule Issue

You will need to build cor-lists for that.

Here is a good doc on how to do that, it is also described well in CME admin guide as well as many other threads on this forum:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

HTH,

Chris

New Member

Re: Voice Translation Rule Issue

Chris thanks a lott

730
Views
0
Helpful
7
Replies